CRAN_Status_Badge CRAN RStudio mirror downloads minimal R version Depsy DOI

Coverage status R-CMD-check

lifecycle npm

Overview

The jpmesh package is a package that makes it easy to use “regional mesh (i.e. mesh code JIS X 0410 )” used in Japan from R. Regional mesh is a code given when subdividing Japanese landscape into rectangular subregions by latitude and longitude. Depending on the accuracy of the code, different regional mesh length. By using the same mesh in statistical survey etc., it will become possible to handle the survey results of a large area in the area mesh unit.

In jpmesh, mesh codes and latitude and longitude coordinates are compatible with mesh codes from the first region mesh, which is the standard region mesh, to the quarter regional mesh of the divided region mesh (from 80 km to 100 m). Features include “conversion from latitude and longitude to regional mesh”, “acquisition of latitude and longitude from regional mesh”, “mapping on prefecture unit and leaflet”.

Installation

From CRAN

For developers

# the development version from r-universe:
install.packages("jpmesh", repos = "https://uribo.r-universe.dev")

Usage

Create mesh code 

meshcode(5133) # 80km
#> <meshcode[1]>
#> [1] 5133
meshcode(513377) # 10km
#> <meshcode[1]>
#> [1] 513377
meshcode(51337783) # 1km
#> <meshcode[1]>
#> [1] 51337783
meshcode(513377831) # 500m
#> <meshcode[1]>
#> [1] 513377831
meshcode(5133778312) # 250m
#> <meshcode[1]>
#> [1] 5133778312
meshcode(51337783123) # 125m
#> <meshcode[1]>
#> [1] 51337783123
meshcode(5133778300, .type = "subdivision") # 100m
#> <subdiv_meshcode[1]>
#> [1] 5133778300

Convert mesh code to coordinate and vice versa

Return the latitude and longitude for specifying the mesh range from the mesh code.

mesh_to_coords(5133) # 80km
#> # A tibble: 1 × 5
#>     meshcode lng_center lat_center lng_error lat_error
#>   <meshcode>      <dbl>      <dbl>     <dbl>     <dbl>
#> 1       5133       134.       34.3       0.5     0.333
mesh_to_coords(513377) # 10km
#> # A tibble: 1 × 5
#>     meshcode lng_center lat_center lng_error lat_error
#>   <meshcode>      <dbl>      <dbl>     <dbl>     <dbl>
#> 1     513377       134.       34.6    0.0625    0.0417
mesh_to_coords(51337783) # 1km
#> # A tibble: 1 × 5
#>     meshcode lng_center lat_center lng_error lat_error
#>   <meshcode>      <dbl>      <dbl>     <dbl>     <dbl>
#> 1   51337783       134.       34.7   0.00625   0.00417
mesh_to_coords(513377831) # 500m
#> # A tibble: 1 × 5
#>     meshcode lng_center lat_center lng_error lat_error
#>   <meshcode>      <dbl>      <dbl>     <dbl>     <dbl>
#> 1  513377831       134.       34.7   0.00312   0.00208
mesh_to_coords(5133778312) # 250m
#> # A tibble: 1 × 5
#>     meshcode lng_center lat_center lng_error lat_error
#>   <meshcode>      <dbl>      <dbl>     <dbl>     <dbl>
#> 1 5133778312       134.       34.7   0.00156   0.00104
mesh_to_coords(51337783123) # 125m
#> # A tibble: 1 × 5
#>      meshcode lng_center lat_center lng_error lat_error
#>    <meshcode>      <dbl>      <dbl>     <dbl>     <dbl>
#> 1 51337783123       134.       34.7  0.000781  0.000521

Find the mesh code within the range from latitude and longitude.

coords_to_mesh(133, 34) # default as 1km meshcode
#> <meshcode[1]>
#> [1] 51330000
coords_to_mesh(133, 34, to_mesh_size = 80)
#> <meshcode[1]>
#> [1] 5133
coords_to_mesh(133, 34, to_mesh_size = 0.125)
#> <meshcode[1]>
#> [1] 51330000111

There is mesh_convert() as a function to change the mesh size more freely.

# Scale up
mesh_convert("52350432", 80)
#> <meshcode[1]>
#> [1] 5235
# Scale down
mesh_convert("52350432", 0.500)
#> <meshcode[4]>
#> [1] 523504321 523504322 523504323 523504324

Detect fine and neighborhood mesh codes 

# Returns a finer mesh of the area of the mesh codes
# Such as, 80km to 10km mesh codes.
coords_to_mesh(133, 34, 80) %>% 
  fine_separate()
#> <meshcode[64]>
#>  [1] 513300 513301 513302 513303 513304 513305 513306 513307 513310 513311
#> [11] 513312 513313 513314 513315 513316 513317 513320 513321 513322 513323
#> [21] 513324 513325 513326 513327 513330 513331 513332 513333 513334 513335
#> [31] 513336 513337 513340 513341 513342 513343 513344 513345 513346 513347
#> [41] 513350 513351 513352 513353 513354 513355 513356 513357 513360 513361
#> [51] 513362 513363 513364 513365 513366 513367 513370 513371 513372 513373
#> [61] 513374 513375 513376 513377

# the value of the adjacent mesh codes
coords_to_mesh(133, 34, 80) %>% 
  neighbor_mesh()
#> <meshcode[9]>
#> [1] 5032 5033 5034 5132 5133 5134 5232 5233 5234
coords_to_mesh(133, 34, 0.5) %>% 
  neighbor_mesh()
#> <meshcode[9]>
#> [1] 503277994 503370903 503370904 513207092 513207094 513300001 513300002
#> [8] 513300003 513300004

Utilies

Drawing a simplified Japanese map based on the mesh code.

library(ggplot2)
ggplot() +
  geom_sf(data = jpnrect)

Dataset of mesh code for prefectures.

set.seed(71)
administration_mesh(code = 33, to_mesh_size = 80) %>% 
  head() %>% 
  knitr::kable()
meshcode geometry
5133 POLYGON ((133 34, 134 34, 1…
5233 POLYGON ((133 34.66667, 134…
5234 POLYGON ((134 34.66667, 135…
5134 POLYGON ((134 34, 135 34, 1…
5333 POLYGON ((133 35.33333, 134…
5334 POLYGON ((134 35.33333, 135…

Example)

# For leaflet and mapview
library(leaflet)
leaflet() %>% 
  addTiles() %>% 
  addProviderTiles("OpenStreetMap.BlackAndWhite") %>% 
  addPolygons(data = administration_mesh(code = 33101, to_mesh_size = 1))

ggplot() + 
  geom_sf(data = administration_mesh(code = 33, to_mesh_size = 1))

Similar projects

Code of Conduct

Please note that this project is released with a Contributor Code of Conduct. By participating in this project you agree to abide by its terms.